Grey Control Panel
in ,

How To Start A Car With A Bad Starter

Want to know how to start a car with a bad starter? Getting negative feedback after turning the ignition key is one of the worst nightmares faced by car owners. Such occurrence can be quite frustrating especially in emergency situations. Bad starters are usually the major culprit among all other possible reasons behind this issue and a quick resolution is required for the vehicle to start running. 

If you have found yourself in such undesirable situation and you ended up in this article, be rest assured you are in the right place as we will show you different ways to start a car with a bad starter. Let’s dive right in!

How Can I Start A Car With A Bad Starter?

Inability to get a car started can be quite frustrating and this problems are usually associate with defective starters. Car starters are primarily designed to initiate the vehicle engine into full operation. Once the car starter is damaged, the car won’t be able to run. And this require a quick fix as promptly as possible. Fortunately, there are several ways to start a car with a bad starter without service of a mechanic. Let’s explore some of the methods.

Examine The Engine Connections And Wiring

This is a vital step as the problem might arise due to an improper connection between the starter and the battery. A Car Starter requires a steady and optimum power to function properly. Batteries are the major source of vehicles and a decrease in power will ultimately affect the starters functionality. In this regard, a proper check on the wiring between starter and battery is essential. This is to detect as well as to tighten all loosen electrical connections.

Tap The Starter With A Tool

This old trick has been around for a while. It has proven to be an effective method of fixing bad starters. This process is usually carried out by using hand tools. Like a hammer or ratchet to carefully give the starter a good tap. Caution must be applied while carrying out this method. As the starter must be carefully identified and separated from other components of the engine. This move is to ensure other parts are not affected. Also, the taps exerted on the starter should be as gentle as possible to avoid damage.

Remove all corrosive materials

Accumulation of corrosive substances like grease and dirt can affect the starter if it not timely cleaned off. Also, the car battery’s performance can be hampered by corrosion which ultimately lead to insufficient flow of electrical current. This can be fixed by the corroded areas on the battery with a sandpaper.

Inspect The Starter Fuse

A blow up starter fuse might be the reason why your car refuse to start. In this case, you need a simple check on the fuse box. Which is usually located in the dashboard or near the battery. Identification of the starter fuse can be eased by using the vehicle manual; or careful discovery of a fuse labelled as ‘IG’ in the circuit diagram. Once you discover any broken in the fuse, get it replaced. But ensure you use a fuse that has same amperage rating as the faulty one.

Jump Start The Car

This method is effective but require a bit of technicality. To jump start your car, a pair of jumper cables and a spare battery is required. Connect the spare battery with your car battery with the jumper cable. Once this is done, put on the vehicle ignition to charge the battery for few minutes. While using this technique, it is important to connect the batteries accurately on the positive and negative terminals.

Closing thoughts

The methods in this article will come in handy to start a car with a defective starter. However, getting your car regularly inspected is key to prevent such undesirable situations.

What do you think?

Written by webmaster_kzwort

A Close-Up Shot of a Car's Wheel being Washed

How Often Should You Wash Your Car

A Person with Greasy Hands

Why Is My Car Leaking Oil When Parked