How To Remove Tint From Car Windows

Want to know how to remove tint from car windows? Tinted car windows offer the vehicle occupants privacy and protection from harmful UV rays. It is also a fancy feature that adds a bit of elegance and flair to the car outlook. However, they are susceptible to wear and tear and become unappealing over time. Fortunately, removing the degraded tint from car windows requires a lesser effort than it takes to fix and can be done without employing the service of a professional.

In this article, different ways of removing tints from car windows without a scratch will be extensively discussed. Let’s proceed into the details!

How Can I Remove Tint From My Car Windows?

How To Remove Tint From Car Windows
Source: AutoPilot

As fanciful and protective tinting of car windows is, it is susceptible to degradation in the long run due to constant exposure. Over time, common issues like the formation of bubbles and scratches result in an unattractive car window outlook and the tint will need to be removed and replaced. Thankfully, there are several ways to safely remove tint from car windows with relative ease. Let’s explore some of the methods.

Soap And Newspapers 

This traditional method is an effective way of removing tints from car windows. The requirement needed for this method is easy to get and the process is relatively effortless. After getting some soap solution and newspapers, mix the soap with hot water and spray on the tinted window. Cover the wet window with newspapers and keep spraying the newspapers at intervals of 15-20 minutes to keep it wet. After repeating the process for like an hour, carefully begin to peel off the tint film by lifting the edge with your fingernails or razor blade.

Ammonia and Heat

A combination of ammonia and heat is highly effective in removing tints from car windows. However, it is a relatively expensive method and might be unpleasant due to the chemicals involved. To carry out this process, ensure the day is sunny and prepare the materials below.

  • Plastic bags
  • Soap solution
  • Spray bottles
  • Scissors 
  • Ammonia 
  • Razor blade or any Non-metallic sharp objects
  • Face mask
  • Steel wool
  • Tape
  • Paper towels

With the materials above readily available, the first step is to mix the soap with water and cut the plastic bags into sizes enough to cover the tinted areas. Spray the outside of the car window with the soap solution and cover it with one of the plastic bags. Repeat the same on the inside but this time with ammonia and hold the plastic covers in place with tape. Remove the plastic bags after allowing them to sit for like an hour. Carefully proceed with the removal process by lifting the tint film from the edge. However, it is important to wear a face mask and open the car doors to avoid inhalation of ammonia toxic gases.

Fabric Steamer

Sale
BEAUTURAL Steamer for Clothes, Portable Handheld Garment Fabric Wrinkles Remover, 30-Second Fast Heat-up, Auto-Off, Large Detachable Water Tank
  • Detachable 8.79-ounce water tank for 15 minutes of continuous steaming to remove wrinkles perfectly
  • No leaking, no spilling with leak-proof design enables to steam whether vertically or horizontally
  • 1200 watts with 30-second fast heat-up and powerful steam output dewrinkles your clothes in no time
  • Safe to use on all fabrics and suitable for clothes, curtains, furniture, toys and so much more
  • 3 additional attachments lint brush, soft brush, and creaser provide versatile steaming options

Using a fabric streamer is arguably the swiftest method of removing tint from car windows. This process involves filling the steamer with water and holding it approximately 1 inch close to the surface of the tint film. The steam will find its way into the film to loosen the adhesion and melting will be observed. This will allow you to peel off the unwanted tint easily with fingernails. To complete the process, clean the remaining adhesives with a towel and an effective glass cleaner.

Hair Dryer

This tool come in handy when a need to remove tint from car windows arises. With a similar process to using a fabric steamer, the heat generated from a hair dryer finds its way into the tint film and enables easy removal without stress.

Closing Thoughts

The methods above are worth trying as they have proven to be effective. However, a great deal of caution should be applied to avoid causing significant damage to the car windows.

Leave a comment

Your email address will not be published.